Go to homepage

BRIDGE - Desk

Sascha Sartory
Birkenschichtholzkante schwarz matt HPL Bridge Schreibtisch Sekretär
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
Birkenschichtholzkante schwarz matt HPL Bridge Schreibtisch Sekretär
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk
BRIDGE - Desk

Sascha Sartory

delivery time: 3 - 4 weeks

You can order the shelf under the desk top and the matching pedestal separately.
Neuheiten 2024 von Müller Small Living

Building Bridges with BRIDGE

The minimalist desk BRIDGE was designed by the designer Sascha Sartory. Thanks to its comfortable dimensions, it offers ample space while being space-saving at the same time. Additionally, there is the BRIDGE CONTAINER and the VERTIKO KOMMODE, which perfectly complement the desk. 

Practical Storage

Optionally and retrofitable, we offer a narrow shelf with three compartments for BRIDGE, which is mounted under the tabletop.

Intelligent Cable Management

For maximum convenience, BRIDGE is equipped with a removable cable port on top and a rear cable tray below the work surface.

Black, White, Anthracite

All BRIDGE and VERTIKO furniture were designed by the designer Sascha Sartory and are available in black, anthracite, and white with a visible laminated wood edge.

Order sample

Bestsellers & Variants

BRIDGE Schreibtisch

HPL black

BRIDGE Schreibtisch

CPL white

Product details

The BRIDGE desk is 1450 mm wide, 750 mm high, and only 640 mm deep. For maximum convenience, it is equipped with a removable cable port on top and a rear cable tray below the work surface. Additionally, we offer a container with a drawer and an open compartment. Optionally and retrofitable, we offer a narrow shelf with three compartments, which is mounted under the tabletop. The BRIDGE desk is available in the colors black, white, or anthracite.

Hersteller:
Müller Möbelwerkstätten GmbH
Urwaldstraße 8
26345 Bockhorn
Telefon: +49 (0) 44 53 – 98 23 30
info@muellermoebel.de
www.muellermoebel.de

  • Birch laminated wood, 24 mm with a highly durable CPL or HPL coating

  • Width 1450, Height 750, Depth 640 mm

  • Delivered disassembled by freight

Accessories

Accessories

Schreibtischfach Sekretär Bridge
Schreibtischfach Sekretär Bridge
BRIDGE - Desk shelf

€189.00*
Bridge Container mit Tür und Schubkasten CPL weiß
Bridge Container mit Tür und Schubkasten CPL weiß
BRIDGE - Container

€859.00*
Sascha Satory - Designer der Bridge und Vertiko Serien

Designer Sascha Sartory 

With the aim of creating durable and high-quality products, Sascha Sartory, born in 1980, works as a product designer in Cologne. Under the name SARTORY Design, he develops new ideas for various areas of everyday life.


FAQ

What does HPL and CPL mean? 
CPL stands for Continuous Pressed Laminates. HPL stands for High Pressure Laminates (HPL with a thickness of > 2 mm are according to standard EN 438 compact panels). 

What is special about the HPL coating on our black matte furniture? 
Our HPL laminate impresses with its high abrasion, impact, and scratch resistance. It is ideal for horizontal as well as heavily used surfaces. The super matte surface feels velvety warm and is characterized by its excellent anti-fingerprint properties. This makes our HPL laminate unique and universally applicable.

Are there any special care instructions for our HPL coating? 
The HPL coating does not require special care due to its resistant and hygienic, dense surface. The surface is generally easy to clean. It is important to note that sanitary cleaners or cleaning agents with abrasive components should not be used for cleaning, as such cleaners can cause changes in gloss level and scratches. 

What distinguishes HPL and CPL?
 The term CPL already provides a hint about the manufacturing process, meaning CPL is produced in continuously operating double belt presses with a pressing pressure between 30 and 70 bar and temperatures between 150°C and 170°C. Depending on the laminate thickness and press zone length, the feed rate varies between 8 and 15 m/min. HPL is produced in discontinuously operating multi-daylight presses with a pressing pressure between 50 and 90 bar and temperatures of > 120°C. Very often, the pressure in connection with the manufacturing process of laminates is also given in Mega-Pascals (MPa). The multi-daylight presses have between 10 and 20 levels, and each level accommodates approximately 8 laminate sheets with a nominal thickness of 0.50 to 0.80 mm. Depending on the press loading and the maximum temperature, the complete pressing cycle including cooling takes between 20 and 60 minutes.

FAQ products

Delivery through the retailer
Müller Möbelwerkstätten collaborates with a variety of furniture retailers. This allows us to have the furniture purchased from our online shop delivered to you through them. We send the furniture to the logistics center of the respective retailer, from where our competent partner takes over the processing of your order. They will contact you to arrange a delivery appointment and optional assembly booking. 

1. Why is the goods not delivered directly to me? 
In most cases, delivery through our retailer involves bulky goods that require increased logistical effort for delivery. If, for example, the order were delivered directly to you by a freight forwarder, this would correspond to delivery only to the curb. With our retailers, however, we have specially trained personnel who have been trained by us for the assembly and transportation of Müller Möbelwerkstätten furniture. Particularly noteworthy for the "delivery through our specialist retailer" service are: 
Scheduled delivery according to desired date 
Delivery behind the first lockable door 

2. Are all furniture items delivered by the retailer? 
No, in not all cases can we offer this service. This naturally depends on whether there is a retailer in close proximity. In addition, our small furniture items can regularly be shipped with a parcel service (GLS). 

3. Assembly by our retail partner 
Assembly can be booked separately at checkout in our online shop. The costs depend on the corresponding value of the goods. The option of assembly is, of course, not mandatory, but is recommended for selected furniture items due to their complexity. In addition to the actual assembly, this service offers further advantages: 
Carrying upstairs to the apartment included 
Subsequent disposal of packaging Furthermore, the service is recommended for selected furniture items due to their complexity, such as: Modular Plus wardrobe Plane wardrobe Flai wardrobe

Yes, in some countries (e.g., DE, AT, CH), we offer an assembly service. Click on "Premium Service" in the shopping cart, and your furniture will be assembled at your home by a specialist retailer for an additional fee.

Jochen Müller, Müller Möbelwerkstätten

Need advice?

Our team is happy to assist you with any questions regarding our products, the ordering process, or any other important matters!

info@muellermoebel.de
+49 (0)4453 9823-30

To the team